What problems should be paid attention to when applying pipe bender

The microcomputer controller of the CNC pipe bender can preset 16 angles, and the foot switch of the pipe bender can be used to complete the whole process at one time. The reinforcing ribs of the head part and the bed part of the pipe bender are planned, and the internal stress is eliminated by annealing treatment. The body has sufficient strength and rigidity to prevent permanent deformation. When the drive spindle is installed, it is inserted directly from the upper part of the machine head. The placement is accurate and easy to maintain. The bending spindle and the drive sprocket are grouped for casting, group processing, group gear hobbing, keyless connection, symmetrical force, driven by double cylinders, pipe bending process In the middle, the hydraulic system actively saves the buffer before the boom is close to the set angle of bending, which greatly improves the bending accuracy and quick reset. There is a saving buffer near the starting point during the return process, which greatly improves the reset accuracy and work compliance. Next, the staff of Jinyuan Pipe Bending Machine will briefly introduce to everyone what details are necessary in the use of the pipe bender.
1. Bending machine body department: The machine body department adopts channel steel welded main shaft frame, and the upper and lower bearing support plates of the main shaft are installed in the frame with 15mm thick steel plates.
2. System department: The hydraulic system department can accept civil accessories or aircraft hydraulic accessories.
3. Transmission department: The transmission department is composed of cylinders, racks, gears, and transmission shafts.
4. Mould department: The mould department is a tool made according to the different surface diameters. It is made of bearing steel or roll steel, and the heat treatment penalty is HRC48~52.
5. Clamping department: The hydraulic clamping department is composed of a skateboard, a rocker arm, and a hydraulic cylinder. The telescopic cylinder moves the rocker arm.
6. Electrical sector.
Pipe benders are very common in survival, and have the advantages of multiple functions, fair layout, and simple operation. But after all, they are machines. Because they are planned to be used for bending metals, they are definitely harmful. If they are not properly manipulated, they will be definitely harmful. When the pipe bending machine transmission main shaft device is inserted directly from the upper part of the head, it is accurately placed and easy to maintain. The pipe bending main shaft and the transmission sprocket are grouped for casting, group processing, group gear hobbing, keyless connection, symmetrical force, driven by double cylinders, During the bending process, the hydraulic system actively saves the buffer before the boom is close to the set angle of bending, which greatly improves the bending accuracy and quick reset. There is a saving buffer near the starting point during the return process, which greatly improves the reset accuracy and Things obey.