What is the test mode of the pipe bender?

What is the test mode of the CNC pipe bending machine? After the test mode is pedaled, the machine starts to work. During the working state, the machine will stop working if you pedal again. If you need to work again, you need to pedal again, and press the stop button You can also stop working. Test machine related instructions: The test machine is only suitable for the dry running condition of the machine, and cannot be used for operation and processing! Please be cautious! The test machine just omits all the pedal actions from the first one, other movement processes and production processing In the same way, after the work starts, the machine will continue to circulate until the count value is equal to the number set at the beginning or the key is considered to be stopped. The pipe bending head of the pipe bending machine can move horizontally along the guide rail, which is necessary for the pipe bending machine to adjust the pipe groove of the bending die to align with the center line of the machine tool after the bending die is replaced. This is more simple and convenient than adjusting the center line of the machine tool by adjusting the guide rail and tailstock on the bed. Manual mode enters the manual only to do the screen, press the button beside the action description to perform various actions. The end of the operation action is determined by the time set at the beginning. After the time is up, it will be displayed as “in place” after the full-automatic mode pedaling starts to operate. During the working state, the machine will stop working if the pedal is operated again, and the machine needs to continue to work. Pedal again and press the stop button to stop T operation. A work flow needs to be completed once by pedaling, that is, once at the beginning of the work. After pedaling in semi-automatic mode, the operation will start. During the working state, the machine will stop when pedaling again. If the machine needs to work again, pedal again. Press the stop button to stop working. A process flow allows two pedaling work, that is, once the work starts and once when the pipe is taken. The position of the core rod has a certain degree of influence on the bending and forming of the pipe. In theory, its tangent line should be flush with the tangent line of the pipe bending die, but it has been proved by a lot of practice that it is better to make it 1~2mm in advance. The core rod mainly plays the role of supporting the curved inner wall of the pipe to prevent deformation during the bending process. At present, if the mandrel is not used when the domestic pipe is bent on the machine, its quality is more difficult to guarantee. There are also many kinds of mandrels, such as cylindrical mandrels, universal single, double, triple, and four-ball mandrels, directional single and multi-ball mandrels, and so on.