When assembling, insert directly from the upper part of the pipe bending machine head. During normal bending processing of the CNC pipe bender, attention should be paid to the use of lubricating oil to prevent the equipment from being dry and worn for a long time, and to ensure that the servo drive is clean and tidy. When replacing the zigzag pipe or changing the zigzag shape At the same time, you should pay attention to prevent mechanical interference, and debug each point in manual mode to see if there is interference. With a good understanding of the CNC pipe bender, each start and use of the electric welding machine will consume a lot of power, making it CNC The voltage instability of the pipe bending machine may lead to the inaccuracy of the servo drive part of the pipe bending machine, which damages the electrical part of the CNC pipe bending machine. Then carry on programming operation according to the actual demand, after shutting down, should turn off the power immediately to reduce the loss. 1. Bending machine body part: The bed part adopts channel steel welded main shaft structure, and the upper and lower bearing support plates of the main shaft are installed in the structure with 15mm thick steel plates. 2. Mould part: The mould part is an auxiliary tool manufactured according to different surface diameters. It is made of bearing steel or rolled rat steel, heat-treated HRC48-52.3. Clamping part: The hydraulic clamping part is composed of a slide plate, a rocker arm, and a hydraulic cylinder Composition, the telescopic cylinder drives the rocker arm to move. 4. Electrical part. 5. System part: The hydraulic system part can choose civil accessories or aircraft hydraulic accessories. 6. Transmission part: The transmission part is composed of oil, rack, gear and transmission shaft.
Get The Best Quote For Your Products
